the house he lived in while at Killingworth. All the money which Stephenson was enabled to save he devoted to the education of his son Robert. At a public dinner held in Newcastle in his honour, not long before his death, Mr. Stephenson thus referred to this fact in his early career :— "I have worked my way," he said, "but I have worked as hard as any man in the world, and I have overcome obstacles which it falls to the lot of but few men to encounter. I have known the day, when my son was a child, that after my daily labour was at an end, I have gone home to my single room, and cleaned clocks and watches, in order that I might be able to put my child to school. I had felt too acutely myself the loss of an education not to be fully sensible of how much advantage one would be to him."
After a short residence at Killingworth, Stephenson became familiar with the steam engine; he studied it, and his mind became awakened to the contemplation of its powers, its weaknesses, and its capabilities. He brought the subject of constructing a Travelling Engine, as he then denominated the locomotive, under the notice of the lessees of the Killingworth Colliery, in the year 1813. Lord Ravensworth, the principal partner, had already formed a very favourable opinion of Stephenson, from the important improvements which he had effected in the colliery engines, both above and below ground; and, after considering the matter, and hearing Stephenson's statements, he authorised him to proceed with the construction of a locomotive. "The first locomotive that I made," said Mr. Stephenson, on the opening of the Newcastle and Darlington Railway, in 1844, "was at Killing worth Colliery, and with Lord Ravensworth's money. Yes! Lord Ravensworth and Partners were the first to entrust me with money to make a locomotive engine. That engine was made thirty-two years ago, and we call it 'My Lord.' I said then to my friends, there was no limit to the speed of such an engine, if the works could be made to stand it."
Mr. Stephenson followed to some extent, in the first locomotive constructed at Killingworth, the plan of Blenkinsop's engine. The boiler was cylindrical, 8 feet in length, and 34 inches diameter, with an internal flue tube 20 inches wide passing through the boiler. The engine had two vertical cylinders of 8 inches diameter and 2 feet stroke let into the boiler, working the propelling gear with cross heads and connecting rods. The power of the two cylinders was continued by means of spur wheels, which communicated the motive power to the wheels supporting the engine on the rail, instead of as in Blenkinsop's engine, to cog-wheels which acted on the cogged rail independent of the four supporting wheels. This adoption of spur-gear was the chief peculiarity of the new engine; it worked upon what is termed the second motion. The chimney was of wrought iron, around which was a chamber extending back to the feed pumps, for the purpose of heating the water previous to its injection into the boiler. The engine had no springs whatever, and was mounted on a wooden frame supported on four wheels. In order, however, to neutralise as much as possible the jolts and shocks which such an engine would necessarily encounter from the obstacles and inequalities of the then very imperfect plate-way, the water-barrel which served for a tender, was fixed to the end of a lever and weighted, the other end of the lever being connected with the frame of the locomotive carriage. The engine was, after much labour and anxiety, and frequent alteration of parts, at length brought to completion, having been about ten months in hand. It was first placed upon the Killingworth railway on the 25th July, 1814, and its powers were tried on the same day. On an ascending gradient of 1 in 450, the engine succeeded in drawing after it eight loaded waggons of 30 tons' weight, at about 4 miles an hour, and by the aid of his powerful friends Mr. Stephenson was shortly after enabled to take out a patent for it. The next year he erected his second engine, with further improvements.
Without entering upon a discussion as to who invented the locomotive engine, which would be somewhat out of place, it may be observed, that previous to the period of which we are speaking, other locomotives had been put forward besides that of Blenkinsop, patented in 1811. Trevithick made an engine for the common road, which he patented March 24th, 1802; and in 1804 he took out a patent for the locomotive which he constructed for tramways; but the honour of introducing the first locomotive engine in the North of England is claimed for Whitfield and Steele, without ascribing to them priority over Trevithick. A plan of Trevethick's engine has been compared with the plan of the locomotive engine made in 1804 at Mr. John Whitfield's foundary in. Pipewellgate, Gateshead, by Mr. John Steele; and the two, with the exception of some difference in detail, are essentially the same. Steele and Trevithick were friends and fellow-workers. Steele was labouring with Trevithick both before and after the engine of 1804 was built at Gateshead; and the Welsh and North Country plans, as has been stated, are found to be alike. Trevethick's is of prior date to Steele's, but Steele was no mere copyist, and we claim for him the honour of being a co-labourer with Trevithick, the constructor of the first locomotive engine. Steele, it appears, was employed by the British Government in raising sunken ships, and afterwards established engine works at Rouen. He was there commissioned to make marine engines for the Government of France. Two steam-boats he made, with oscillating cylinders, from 30 to 40 years ago. A third was completed, but not handed over, when Steele received intelligence of the violent death of his brother-in-law, Nicholas Young, engineer at Fawdon Colliery, who had been killed by accident; and he started with the steamer on an experimental trip, intending to visit England, and bring his widowed sister and her child to his own home. His voyage, however, was brought to a fatal termination. The boat called at some French port on her way to our coast; Steele dined on shore with a friend; and on his return he was informed that something had gone wrong with the safety-valve. Leaving his companions in the carriage which had brought them down to the water, he went on board to put the matter right, when suddenly the boiler exploded, and he and several others on board were killed. Such. in 1827, was the end of poor Steele, whose memory we would rescue from oblivion, and whose claims in connection with the locomotive we would establish, without injustice to Trevithick or offence to his friends. — See "Gateshead Observer," and "Mining Journal," 1858.
Killingworth Colliery was subject to frequent explosions; and during the time that Stephenson was employed as a brakesman at the West Moor several blasts took place in the pit, by which many workmen were scorched and killed, and the owners of the colliery sustained heavy losses. One of the most serious of these accidents occurred in 1806, not long after he had been appointed brakesman. Stephenson was working at the mouth of the pit at the time, and thirty years after the event, he thus describes it before a Committee of the House of Commons :— "The pit had just ceased drawing Coals, and nearly all the men had got out. It was some time in the afternoon. There were five men that went down the pit; four
Please Note: These web pages retain the original pagination from the publication